Email: polymerpavers@gmail.com
Polymers India is one of the oldest registered unit with DIC. Formerly we were the ancillary unit of MPSEB and DOT for the manufacturing of ACSR conductor wires and GI insulated and drop wires.
Polymers India is one of the leading manufactures of Interlocking Pavers Blocks. We offer an exciting alternative to conventional surfacing techniques. We manufactures pavers in variety of colors, shapes and sizes, making them more attractive than ordinary cement paving and opening up unlimited possibilities of Mix and Match. The Pavers are also suitable for applications with anti-skid and anti-fungal requirements Pavers are being used all over the world to strengthen and beautify porches, drive ways, car parks, street walks, petrol pumps, sundecks, bus stops, factory flooring, railway platform etc.
We had been awarded with ISO 9001:2008 Certificate recently for Quality and Process Management from NORSK AKKREDIETERING MSYS 007 Norway through its subsidary KVQA Certification Services Pvt. Ltd.
1. CEMENT:
The Cement used in the manufacturing of Paving Blocks complies with the requirements of IS: 8112 for high Strength Ordinary Portland Cement and IS: 1489 Portland Pozzolana Cement.
2. AGGREGATES:
The fine and course aggregate consists of naturally occurring crushed or uncrushed materials which apart from the grading requirements comply with IS: 383. The fine aggregates used contain a minimum of 25% natural Silicon Sand.
3. WATER:
The water used for mixing and curing is clean and free from deleterious substances.
4. CEMENT CONTENTS:
The cement contents of the compact concrete shall be not less than 325 kg/cum.
5. CURING:
This is the most important and integral part of Precast concrete and in Polymers this is done with most sincerity and vigil so as to ensure the 100% quality of the finished goods.
6. DIMENSIONS:
The Blocks can be of different sizes and dimensions like Rectangular, Square, Triangular, Hexagon, Zigzag etc. The blocks shall be chamfered at top edges. The width and height of the chamfered edges measured in horizontal and vertical projection will be at least 4mm and will not exceed 6mm. The Blocks shall be of uniform shape and have no structural faults such as gravel accumulations, hollows or cracks. The tiles will be fairly straight flat and rectangular and will have virtually no burrs or projections
7. TOLERANCES:
Length: The length of all Blocks will be within +/- 2mm of the nominal specified length.
Width: The width of all Blocks will be within +/- 2mm of the nominal specified width.
Thickness: The thickness of all Blocks will be within +/- 3mm of the nominal specified thickness.
8. TECHNICAL ASPECTS:
| Particulars | Compressive Strength | Surface Abrasion | Water Absorption |
| Paver Blocks 60mm | 300 KG/sq.cm | 1.5-2 mm | 1-1.2% |
| Paver Blocks 80mm | 400 KG/sq.cm | 1.5-2 mm | 1-1.2% |
| The Paving Blocks mainly falls under following categories: | |
| 1. Light Duty | Thickness 40mm |
| 2. Medium Duty | Thickness 60mm |
| 3. Heavy Duty | Thickness 80mm |
| 4. Extra Heavy Duty | Thickness 100mm |
 |
 |
 |
| Tri Hex | I Section | Uni Block |
PRODUCTS AVAILABLE:-
PAVER BLOCKS
GRASS PAVERS (PAVING GRIDS)
HOLLOW & SOLID BLOCKS
KERBS
Details of the contact person in the sales department:
Sanjeevani Nagar, Jabalpur:
